- Username
- Password
forgot?

iRubric: DT1_HW#3a Grading rubric

edit print share Copy to my rubrics Bookmark test run assess... delete Do more...
DT1_HW#3a Grading DT1_HW#3a Grading Rubric Code: V2X764A Ready to use Public Rubric Subject: Engineering Type: Homework Grade Levels: Undergraduate

Fig 3.3 Angle Jig Descriptions 60 %
	No Credit 0 pts	Poor 2 pts	Fair 4 pts	Good 5 pts
Handle 5 pts 3' use single revolve feature to create handle part 2' sketch is fully defined -1' if use more than 1 revolve -1' if sketch is not fully defined	No Credit	Poor	Fair	Good
Sketch Dimensions 5 pts show dimensions dist=0.75, 1.4, 6.5 R=0.75, R=1 -1'/missing dimension	No Credit	Poor	Fair	Good
Fillet and Chamfer Features 5 pts 3' use fillet feature with R=0.23 for two edges 2' use chamfer feature with 45°x0.06 -1'/missing dimension	No Credit	Poor	Fair	Good
Section Sketch-Rectangle 5 pts Section 1: dist=0.1, dist=0.5 Section 2: dist=0.3, dist=0.7 -1'/missing dimension -1' if sketch is not fully defined	No Credit	Poor	Fair	Good
Section Sketch-Circle 5 pts Section 3 & 4: dia=0.5 for both circles -1'/missing dimension -1' if sketch is not fully defined	No Credit	Poor	Fair	Good
Loft Feature 5 pts -1' if no loft used -1' if loft feature is twisted	No Credit	Poor	Fair	Good
Others 40 % No dimension check, only check if the sketch has correct geometry and is fully defined
	No Credit 0 pts	Poor 2 pts	Fair 4 pts	Good 5 pts
Fig 3.1 HP Chamber 5 pts -1' if no draft or no shell feature -1' if model geometry is wrong -1' if sketch is not fully defined	No Credit	Poor	Fair	Good
Fig 3.2 Reflector Mast 5 pts -1' if no sweep feature -1' if model geometry is wrong -1' if sketch is not fully defined	No Credit	Poor	Fair	Good
Fig 3.4 V-Block 5 pts -1' if model geometry is wrong -1' if sketch is not fully defined	No Credit	Poor	Fair	Good
Finish All Problems 5 pts	No Credit	Poor	Fair	Good