iRubric: sp21_HW#1 Grading rubric

edit print share Copy to my rubrics Bookmark test run assess... delete Do more...
sp21_HW#1 Grading DT1_HW#1 Grading Rubric Code: M2227A4 Ready to use Public Rubric Subject: Engineering Type: Homework Grade Levels: Undergraduate

Fig 1.3 Split Guide Descriptions
	Points 0 pts
Front Plane & Unit 5 pts 2' sketch on front plane 3' unit: millimeter	Points
Fully Defined Sketch 8 pts 2' sketch has correct geometry 2' use mirror in sketch (should have centerline in the middle) 1' sketch is fully defined (no negative sign)	Points
Dimension-Big Arcs & Circles 2 pts sketch has arc dimensions 3' R=130, R=175, R=200 2' Dia=25 equal diameter for two circles	Points
Dimension-Fillets 4 pts sketch has the following radii 1' 2 x R=37 2' 4 x R=12 2' 4 x R=25	Points
Dimension-Angles 5 pts angle =15 deg, 30 deg or angle = 15 deg, 15 deg	Points
Dimension-Dist 9 pts 3' dist=25 2' dist=65 or Dist=130	Points
Others No dimension check, only check if the sketch has correct geometry and is fully defined
	Good 0 pts
Fig 1.1 Hex Slot Bracket 3 pts -1' if sketch is not fully defined -1' if unit is not MMGS	Good
Fig 1.2 Fixture 3 pts -1' if sketch is not fully defined -1' if unit is not IPS	Good
Fig 1.4 Open Support 3 pts -1' if sketch is not fully defined -1' if unit is not IPS	Good
Finish All Problems 3 pts	Good