- Username
- Password
forgot?

iRubric: SP19_HW#5 Grading rubric

edit print share Copy to my rubrics Bookmark test run assess... delete Do more...
SP19_HW#5 Grading FA18_HW#5 Grading Rubric Code: KXC4A68 Ready to use Private Rubric Subject: Engineering Type: Homework Grade Levels: Undergraduate

Valve Body_Part Descriptions 30 % This is simple check if necessary features are used to create part
	No Credit 0 pts	Poor 5 pts	Fair 8 pts	Good 10 pts
Main Part 10 pts no dimension check 4' check if the main body is created 4' pattern is used for top and bottom 6 side parts 2' nose part is created	No Credit	Poor	Fair	Good
Counterbore 10 pts 2' check if counterbore hole feature is used for front hole 8' check the dimensions dia=0.562, dep=2.75 dis=1, dep=0.25 -2'/error	No Credit	Poor	Fair	Good
Standard Hole 10 pts 2' check if #10-32 UNF hole is used around counterbore hole 4' size 10-32, dep=0.375 4' pattern used to create 3 holes	No Credit	Poor	Fair	Good
Valve Body_Drawing 40 %
	No Credit 0 pts	Poor 5 pts	Fair 8 pts	Good 10 pts
Format 10 pts 4' use format for drawing 2' load drawing options 2' good alignment between 2D views (use projection views) 2' show note "Density, Color"	No Credit	Poor	Fair	Good
Top View-Dimension 10 pts 2' show BC circle (dashed circle line) 1' show center marks show other dimensions 1'/dimension, 7' in total dia=3.5 6x dia=0.47 equally spaced dia=2.812 dia=1.938 dia=2 R=0.5 dist=1.594	No Credit	Poor	Fair	Good
Front View-Dimension 10 pts 4' counterbore hole callout dia=0.562, dep=2.75 dia=1.000, dep=0.25 2' standard hole callout 4' in total to show other dimensions, 1'/dimension dia=1.50 dist=0.313 dist=1.125 dist=2.25	No Credit	Poor	Fair	Good
Section & 3DView 10 pts 2' show 3D view 4' show section view 4' show all central axis -1'/missing axis	No Credit	Poor	Fair	Good
Fig 5.1 & 5.2 30 %
	No Credi 0 pts	Poor 5 pts	Fair 10 pts	Good 15 pts
Fig 5.1 15 pts 5' Create creo Part 5' use format create Creo drawing with 4 views 5' give dimensions to 2D views	No Credi	Poor	Fair	Good
Fig 5.2 15 pts 5' Create creo Part 5' use format create Creo drawing with 4 views 5' give dimensions to 2D views	No Credi	Poor	Fair	Good