0 pts
2 pts
4 pts
5 pts
3' use single revolve feature to create handle part 2' sketch is fully defined -1' if use more than 1 revolve -1' if sketch is not fully defined
show dimensions dist=0.75, 1.4, 6.5 R=0.75, R=1 -1'/missing dimension
3' use fillet feature with R=0.23 for two edges 2' use chamfer feature with 45°x0.06 -1'/missing dimension
Section 1: dist=0.1, dist=0.5 Section 2: dist=0.3, dist=0.7 -1'/missing dimension -1' if sketch is not fully defined
Section 3 & 4: dia=0.5 for both circles -1'/missing dimension -1' if sketch is not fully defined
-1' if no loft used -1' if loft feature is twisted
-1' if no draft or no shell feature -1' if model geometry is wrong -1' if sketch is not fully defined
-1' if no shell feature -1' if model geometry is wrong -1' if sketch is not fully defined
-1' if model geometry is wrong -1' if sketch is not fully defined