iRubric: DT1_HW#1 Grading rubric

edit print share Copy to my rubrics Bookmark test run assess... delete Do more...
DT1_HW#1 Grading DT1_HW#1 Grading Rubric Code: H2X6XCA Ready to use Public Rubric Subject: Engineering Type: Homework Grade Levels: Undergraduate

Fig 1.4 Support Plate Descriptions 60 %
	No Credit 0 pts	Poor 2 pts	Fair 4 pts	Good 5 pts
Front Plane & Unit 5 pts 2' sketch on Top Plane 3' unit: IPS	No Credit	Poor	Fair	Good
Fully Defined Sketch 5 pts 2' sketch has correct geometry 2' use mirror in sketch (should have centerline in the middle) 1' sketch is fully defined (no negative sign)	No Credit	Poor	Fair	Good
Outer Profile 5 pts sketch has arc/line dimensions 1.5' 2@R=.75, R=1.75 1.5' 3 lines 2' dim's 2.10/(1.75+.75)	No Credit	Poor	Fair	Good
Slots and Thru Hole 5 pts sketch has the following items 2' Slots L=.75/W=.56 (2) 1' ref's Horizontal, 1' Hole dia=1.50 1' ref arc center	No Credit	Poor	Fair	Good
Hole Pattern (6) 5 pts 3' holes/pat (dia, qty, BC=2.40) 2' centered on R=1.75, start angle = 0 deg	No Credit	Poor	Fair	Good
Relations/Constraints 5 pts 3' tangency (6) places 2' Horizontal/Vertical centerlines	No Credit	Poor	Fair	Good
Others 40 % No dimension check, only check if the sketch has correct geometry and is fully defined
	No Credit 0 pts	Poor 2 pts	Fair 4 pts	Good 5 pts
Fig 1.1 Hex Slot Bracket 5 pts -1' if sketch is not fully defined -1' if unit is not MMGS sketch has correct geometry	No Credit	Poor	Fair	Good
Fig 1.2 Slotted Retainer 5 pts -1' if sketch is not fully defined -1' if unit is not MMGS sketch has correct geometry	No Credit	Poor	Fair	Good
Fig 1.3 Multi-Tool 5 pts -1' if sketch is not fully defined -1' if unit is not MMGS sketch has correct geometry	No Credit	Poor	Fair	Good
Finish All Problems 5 pts	No Credit	Poor	Fair	Good