iRubric: SP19_HW#4 Grading rubric

edit print share Copy to my rubrics Bookmark test run assess... delete Do more...
SP19_HW#4 Grading FA18_HW#4 Grading Rubric Code: DXC48XA Ready to use Private Rubric Subject: Engineering Type: Homework Grade Levels: Undergraduate

Fig 4.1 Gas Ring Descriptions 50 %
	No Credit 0 pts	Poor 5 pts	Fair 8 pts	Good 10 pts
Circular Base 10 pts base: dia=8; thickness =1.25 remove material/hole in middle dia=1, no weak dimension -2'/error (including wrong dimension, weak dimension)	No Credit	Poor	Fair	Good
Extrude-Cut 10 pts Remove materiel Sketch: R=2.25, R=3.5, angle=30, thickness=0.25 no weak dimension -2'/error (including wrong dimension, weak dimension)	No Credit	Poor	Fair	Good
Hole 10 pts 3' use hole feature 3' choose "diameter" type 2' dia=0.75, 2' B.C. dia=5.76	No Credit	Poor	Fair	Good
Fillets 10 pts use round feature or create arc with r=0.25 -2'/error	No Credit	Poor	Fair	Good
Group Feature &Pattern 10 pts 5' using group feature 5' for using pattern to create 8 cuts/holes	No Credit	Poor	Fair	Good
Fig 4.2 Burner Guide 20 % Mainly check the relationship by changing the whole length
	No Credit 0 pts	Poor 5 pts	Fair 8 pts	Good 10 pts
Pattern 10 pts 10' for using pattern to create 8 holes 0' if no pattern used	No Credit	Poor	Fair	Good
Relationship 10 pts Change the total length to 9 to see if the spacing between holes will change together. the 0.5619 distance should be the same	No Credit	Poor	Fair	Good
Fig 4.3 Burner Plate 10 %
	No Credit 0 pts	Poor 5 pts	Fair 8 pts	Good 10 pts
Part 10 pts No dimension check, only check if pattern feature is used -5' if no pattern	No Credit	Poor no pattern used	Fair	Good
Fig 4.4 PVC Clamp 20 % All parts are graded by completeness, no dimension check.
	No Credit 0 pts	Poor 5 pts	Fair 8 pts	Good 10 pts
Part 10 pts Create PVC Clamp part	No Credit	Poor	Fair	Good
Mirror or Pattern 10 pts check if mirror or pattern feature was used for creating part 0' if no mirror or pattern used	No Credit	Poor	Fair	Good