iRubric: SP20_HW#2 Grading rubric

edit print share Copy to my rubrics Bookmark test run assess... delete Do more...
SP20_HW#2 Grading FA19_HW#2 Grading Rubric Code: D2W9A8B Ready to use Private Rubric Subject: Engineering Type: Homework Grade Levels: Undergraduate

Fig 2.4 Revolve and Sweep Descriptions 60 %
	No Credit 0 pts	Poor 2 pts	Fair 4 pts	Good 5 pts
Unit and Color 5 pts 3' model use unit: millimeter 2' show brass color	No Credit	Poor	Fair	Good
Revolve 5 pts 2' use single revolve feature to create main part 3' revolve sketch is fully defined -1' or -2' if sketch is not fully defined	No Credit	Poor	Fair	Good
Revolve Sketch: Arc 5 pts show the arc dimensions: R=10, R=20, R=60, R=12.5 -1'/missing dimension	No Credit	Poor	Fair	Good
Revolve Sketch: Distance 5 pts show the distance dimensions: dist=20, 40, 80, 90, 220 -1'/missing dimension	No Credit	Poor	Fair	Good
Sweep Section 5 pts 2' use single sweep feature to create side sweep part 2' ellipse section dimension dist=10, dist=35 1' ellipse section sketch is fully defined	No Credit	Poor	Fair	Good
Sweep Path 5 pts show all dimensions R=20, R=150 dist=10, 60,65 -1'/missing dimension	No Credit	Poor	Fair	Good
Others 40 % No dimension check, only check if the sketch has correct geometry and is fully defined
	No Credit 0 pts	Poor 2 pts	Fair 4 pts	Good 5 pts
Fig 2.1 Alignment Bracket 5 pts -1' if no yellow color -1' if model geometry is wrong	No Credit	Poor	Fair	Good
Fig 2.2 Taper Cap 5 pts -1' if no red color -1' if model geometry is wrong -1' if use more than single revolve	No Credit	Poor	Fair	Good
Fig 2.3 Clip Handle 5 pts -1' if no chrome color -1' if model geometry is wrong -1' if use more than single sweep	No Credit	Poor	Fair	Good
Finish All Problems 5 pts	No Credit	Poor	Fair	Good