iRubric: FA19_HW#1 Grading rubric

edit print share Copy to my rubrics Bookmark test run assess... delete Do more...
FA19_HW#1 Grading SP19_HW#4 Grading Rubric Code: BXCC9XB Ready to use Private Rubric Subject: Engineering Type: Homework Grade Levels: Undergraduate

Fig 1.3 Split Guide Descriptions 60 %
	No Credit 0 pts	Poor 2 pts	Fair 4 pts	Good 5 pts
Front Plane & Unit 5 pts 2' sketch on front plane 3' unit: millimeter	No Credit	Poor	Fair	Good
Fully Defined Sketch 5 pts 2' sketch has correct geometry 2' use mirror in sketch (should have centerline in the middle) 1' sketch is fully defined (no negative sign)	No Credit	Poor	Fair	Good
Dimension-Big Arcs & Circles 5 pts sketch has arc dimensions 3' R=130, R=175, R=200 2' Dia=25 equal diameter for two circles	No Credit	Poor	Fair	Good
Dimension-Fillets 5 pts sketch has the following radii 1' 2 x R=37 2' 4 x R=12 2' 4 x R=25	No Credit	Poor	Fair	Good
Dimension-Angles 5 pts angle =15 deg, 30 deg or angle = 15 deg, 15 deg	No Credit	Poor	Fair	Good
Dimension-Dist 5 pts 3' dist=25 2' dist=65 or Dist=130	No Credit	Poor	Fair	Good
Others 40 % No dimension check, only check if the sketch has correct geometry and is fully defined
	No Credit 0 pts	Poor 2 pts	Fair 4 pts	Good 5 pts
Fig 1.1 Hex Slot Bracket 5 pts -1' if sketch is not fully defined -1' if unit is not MMGS	No Credit	Poor	Fair	Good
Fig 1.2 Fixture 5 pts -1' if sketch is not fully defined -1' if unit is not IPS	No Credit	Poor	Fair	Good
Fig 1.4 Open Support 5 pts -1' if sketch is not fully defined -1' if unit is not IPS	No Credit	Poor	Fair	Good
Finish All Problems 5 pts	No Credit	Poor	Fair	Good