0 pts
2 pts
4 pts
5 pts
2' use extrude feature 2' base plate: dia=125, depth=10 1' fully defined sketch
1' use simple hole feature to create 1st hole 2 hole dia=15, B.C. dia=100, fully defined 2' use circular pattern to create 3 holes about central axis -1' if sketch is not fully defined
2' extrude feature used 3' dia=50, dia=40, depth=50 from base plate -1' if sketch is not fully defined
1' use extruded cut 2' dist=6, 12 2' dist=3, 8 -1'/missing dimension -1' if sketch is not fully defined
2' use linear pattern for slots with correct direction 2' number=4, spacing=10 1' skip the third instance of pattern
2' circular pattern the above linear pattern 3' number = 4 with 90 increment
-1' if no 3D circular pattern feature (not 2D sketch pattern) -1' if model geometry is wrong -1' if sketch is not fully defined
-1' if no 3D pattern feature (not 2D sketch pattern) -1' if no hole feature used for middle counterbore hole -1' if model geometry is wrong -1' if sketch is not fully defined